UP FOR SALE IS OUR SNIPER-PERFORMANCE & WALBRO CUSTOM BUILT FUEL PUMP ASSEMBLY TO SUIT FALCON STATION WAGON BA BF UP TO 07-2011 WAGON ONLY WILL NOT SUIT SEDAN OR UTE.

SUITS PUMP SUITS FUEL (PERTOL) ONLY WITH THE GSS341 NOT SUITED FOR E85 WITH THIS PUMP.  

THIS ASSEMBLY IS MADE BY SNIPER PERFORMANCE AND FITTED WITH A GENUINE WALBRO GSS341 255LPH AT 43.3-PSI 3-BAR 12.5v AND CAN SUPPORT UP TO 550BHP.

GENUINE WALBRO MADE IN THE USA.

OUR ASSEMBLY IS CUSTOM MADE IN THE SWIRL-POD AREA TO STOP SURGING UNDER EXTREME TAKE OFFS AND AROUND CORNERS WHICH IS A COMMON PROBLEM WITH THE FACTORY SWIRL POD. THIS WILL STOP THE SURGING PROBLEM BY 100%. 

IT HAS BEEN RACE TRACK TESTED. 1/4 MILE, CIRCUIT AND DRIFT.

THIS ASSEMBLY CONSIST OF ONLY THE BEST OF THE BEST PARTS AVAILABLE AND HAND ASSEMBLED IN MELBOURNE. THE CHEMICAL COMPOUND OF THE POLLIMER IN THIS ASSEMBLY IS MADE BY DUPONT MADE FOR E85 & METHANOL.

WE ARE THE ONLY ONES THAT OFFER THIS WITH A SPECIAL CLIP LOCK PUMP RETANER THAT MOUNTS THE PUMP 10mm ABOVE THE BOTTOM OF THE SWIRL POD THIS KEEPS THE FILTER-STRAINER CLEAN  AND ALLOWS THE PUMP ITS FULL POWER POTENTIAL. ALSO KEEPS THE PUMP QUIETER WITH NO CHANCE OF MOVING AROUND OR COMING LOOSE.

THE HOSES ARE RATED AT TWICE THE BURST PRESSURE OF THE FACTORY HOSES AND ARE HIGH FLOWING.

FITTED WITH ONE PIECE WIRING LOOM DELPHI TO WALBRO WITH STAINLESS STEEL WIRE BRAID & TERMINALS.

STAINLESS STEEL COMPRESSION SPRING, HOSE CLAMP & GUIDE PINS FITTED FOR NO CHANCE OF CORROSION.

HIGH MICRON HIGH FLOW NYLONG STRAINER.

HIGH FLOW MODIFIED FUEL RETURN VALVE TO KEEP THE RETURN PRESSURE LOW AND TO FILL THE SWIRL POD IN HALF THE NORMAL TIME IT WOULD USALY TAKE. 

TO SUIT.

CUSTOM BUILT FORD FALCON BA, BF 09/2002-07/2011 4.0L BARRA 190 24v DOHC VCT MPFI, 5.4L BARRA 220 V8 24v SOHC VCT MPFI & 5.4L BOSS 260 V8 32v DOHC MPFI RWD 4-DOOR WAGON.

FORD FALCON BA 09/2002-09/2005 4.0L BARRA 182 24v DOHC VCT MPFI RWD 4-DOOR WAGON.

FORD FALCON BF 10/2005-07/2011 4.0L BARRA 190 24v DOHC VCT MPFI RWD 4-DOOR WAGON.